Planet WDAP-C3000AX User Manual page 58

Object
WAN Access Type
WAN IP, whether obtained automatically or specified manually, should NOT be on
the same IP net segment as the LAN IP; otherwise, the router will not work properly.
In case of emergency, press the hardware-based "Reset" button.
User Manual of WDAP-C3000AX &WDAP-3000AX
Please select the corresponding WAN Access Type for the Internet,
and fill out the correct parameters from your local ISP in the fields
which appear below.
Select Static IP Address if all the Internet ports' IP
information is provided to you by your ISP (Internet
Service Provider). You will need to enter the IP
address, Netmask, Gateway, and DNS Server provided
to you by your ISP.
Each IP address entered in the fields must be in the
appropriate IP form, which are four octets separated by
a dot (x.x.x.x). The router will not accept the IP address
if it is not in this format.
Static
IP Address
Enter the IP address assigned by your ISP.
Netmask
Enter the Subnet Mask assigned by your ISP.
Gateway
Enter the Gateway assigned by your ISP.
DNS Server
The DNS server information will be supplied by your
ISP.
Select DHCP Client to obtain IP Address information
DHCP
automatically from your ISP.
Select PPPOE if your ISP is using a PPPoE connection
PPPoE and provide you with PPPoE user name and password
info.
Enable or disable PPTP to pass through PPTP
PPTP
communication data.
Enable or disable L2TP to pass through L2TP
L2TP
communication data.
- 58 -
Description