Dhcp - Planet WDAP-C3000AX User Manual

Object
Connection Type
IPv6 Address
Subnet Prefix Length
Default Gateway
IPv6 DNS Server 1
IPv6 DNS Server 2

4.2.9 DHCP

The DHCP service allows you to control the IP address configuration of all your network devices. When
a client (host or other device such as networked printer, etc.) joins your network it will automatically get
a valid IP address from a range of addresses and other settings from the DHCP service. The client
must be configured to use DHCP; this is something called "automatic network configuration" and is
often the default setting. The setup is shown in
User Manual of WDAP-C3000AX &WDAP-3000AX
Figure 4-36: IPv6 WAN setup
Select IPv6 WAN type either by using DHCP or Static.
Enter the WAN IPv6 address.
Enter the subnet prefix length.
Enter the default gateway of the WAN port.
Input a specific DNS server
Input a specific DNS server
Figure 4-37.
- 63 -
Description