Step 3: Enter the encryption key of the wireless AP
If you will be connecting to this Wireless AP in the future, check [Remember this
network].
Step 4: Check if the AirPort is connected to the selected wireless network.
If "Yes", then there will be a "check" symbol in front of the SSID.
(1) Enter the encryption key that is configured in
(2) Click the [OK] button.
Figure 5-11 Enter the Password
Figure 5-12 Connected to the Network
User Manual of WDAP-C3000AX &WDAP-3000AX
- 97 -
section 5.7.2.1