Manual Network Setup -- Tcp/Ip Configuration; Configuring The Ip Address Manually - Planet IAP-1800AX User Manual

3.2 Manual Network Setup -- TCP/IP Configuration

The default IP address of the Industrial 802.11ax Wireless AP is 192.168.1.253. And the default subnet
mask is 255.255.255.0. These values can be changed as you want. In this guide, we use all the default
values for description.
Connect the Industrial 802.11ax Wireless AP with your PC by plugging one end of an Ethernet cable in
the LAN port of the AP and the other end in the LAN port of PC.
In the following sections, we'll introduce how to install and configure the TCP/IP correctly in Windows
10. And the procedures in other operating systems are similar. First, make sure your Ethernet Adapter
is working, and refer to the Ethernet adapter manual if needed.

3.2.1 Configuring the IP Address Manually

Summary:

Set up the TCP/IP Protocol for your PC.

Configure the network parameters. The IP address is 192.168.1.xxx (If the default IP address of
the Industrial 802.11ax Wireless AP is 192.168.1.253, the "xxx" can be configured to any number
from 1 to 252.) and subnet mask is 255.255.255.0.
1
Select Use the following IP address, and then configure the IP address of the PC.
2
For example, the default IP address of the Industrial 802.11ax Wireless AP is 192.168.1.253,
you may choose from 192.168.1.1 to 192.168.1.252.
User Manual of IAP-1800AX & IAP-2400AX
- 41 -