Routing - Planet WDAP-C3000AX User Manual

4.2.4 Routing

Please refer to the following sections for the details as shown in
Routing tables contain a list of IP addresses. Each IP address identifies a remote router (or other
network gateway) that the local router is configured to recognize. For each IP address, the routing table
additionally stores a network mask and other data that specifies the destination IP address ranges that
remote device will accept.
Object
Type
Destination
Net Mask
Gateway
Interface
Comment
Figure 4-31: Routing table
Figure 4-32: Routing setup
There are two types: Host and Net.
When the Net type is selected, user does not need to input the Gateway.
The network or host IP address desired to access.
The subnet mask of destination IP.
The gateway is the router or host's IP address to which packet was sent.
It must be the same network segment with the WAN or LAN port.
Select the interface that the IP packet must use to transmit out of the
router when this route is used.
Enter any words for recognition.
- 60 -
User Manual of WDAP-C3000AX &WDAP-3000AX
Figures 5-28 and
Description
29.