TVS iQube Electric S Manual page 58

1. In the previous connected iPhone, open the
SETTINGS -> BLUETOOTH.
2. Select the instrument
connected previously.
3. Click on the "Forget this device".
Auto pairing
Once the first time pairing is done between vehicle's
instrument cluster and your smart phone, the phone
will automatically connect with the vehicle when the
following conditions are met:
1. Vehicle is switched 'ON' and vehicle is near to
the smart phone.
2. Smart phone's Bluetooth is turned 'ON'
3. First time pairing is ensured.
4. In case of iPhone, the 'TVS iQUBE' app
should be open or be open in background for
auto-pairing to happen.
Every time auto-pairing happens, app will open
automatically and connect with the Instrument cluster.
The connected instrument cluster's display shows
'iQube is now connected'.
56
cluster, which was
Note
If the phone enters battery saver mode, auto-pairing
might not happen. It takes maximum of five minutes
for auto-pairing and it can happen in vehicle running
or in idle condition.
Auto-pairing happens only if the application is locked
in the RAM in multitasking screen of the phone which
has customized OS (Ex : MI, Vivo etc.)
In case of Android phones with Android OS version
above 8.0, for App to work seamlessly, any battery
optimization setting to be removed in the TVS Connect
App and GPS shall be allowed to run in background in
high accuracy mode.
Even if your phone's Bluetooth is already paired
to other gadgets like smart watch, health band or
helmet, the auto-paring works with your TVS iQube's
connected instrument cluster.
If the application unfortunately stops due to unforeseen
circumstances, close and reopen the application and
do the manual pairing for the first time, then auto
pairing will happen subsequently.
For first time pairing, logout from the app, login again
with your login credential and press 'CONNECT' tab.
Once the connected instrument cluster of your TVS
iQube is connected with your smart phone, the
connected instrument cluster displays Bluetooth icon,
your mobiles battery level icon and network providers
signal strength icon.
Note
Incase multiple SIM cards are used in smart phone, by
default, SIM 1's network provider's signal strength is
shown in the display of connected instrument cluster.
Signal strength displayed in the connected instrument
cluster might vary from the display in smart phone as
the former is referred from telephonic standards.
OM TVS iQube Electric S - Rev 4 - As on 10 Nov 2023