TVS iQube Electric S Manual page 20

HANDLE BAR LEFT SIDE
14
13
11. Horn switch
Press the switch '
12. Turn signal lamp switch
Slide the turn signal lamp switch to left '
or right side '
signal lamps (LH / RH). Press the center button of
the switch to turn 'OFF'.
13. HMI switch
The HMI switch is used to operate the menu
screens on the cluster.
14. Left hand brake lever
The rear brake is applied by squeezing the rear
brake lever gently towards the handle grip. The
brake lamp glows on application of rear brake .
15. Left hand brake lever lock
Left hand brake lever lock is useful when your
scooter is parked with side stand on a slope to
avoid falling.
To apply the left hand brake lever lock, squeeze
the left hand brake lock lever fully towards the
grip. Hold the brake lever at the same position,
press and hold the left hand brake lever lock. Now
release the brake lever and ensure that the brake
is locked properly.
To release the left hand brake lever lock, squeeze
the left hand brake lever further in and the lock
will release automatically, release the brake lever
upon releasing the brake lever lock.
18
16
15
12
11
' to operate the horn.
' to operate respective turn
'
16. High/low beam switch
With the head lamp 'ON', press the switch towards
' ' to operate head lamp high beam or press
it towards '
Note
Ensure that the brake lever lock is released (if applied)
before riding the vehicle.
Caution
Use appropriate head lamp beam 'high / low' as per
the traffic and road conditions for your safety and
avoid inconvenience to other riders.
OM TVS iQube Electric S - Rev 4 - As on 10 Nov 2023
' to operate head lamp low beam.