CHARGER SOCKET
The Phase, Neutral & Earth terminals should be placed as per the image.
Use the Tester to find out the Phase line.
Multimeter
As shown in this picture, you can check the input voltage of the available socket.
Normally the reading would be 230 ± 5V.
Note
•
Multimeter selector should be as shown in the picture for measuring AC voltage of domestic power socket.
•
The selector position will vary in each multimeter brand.
•
Red & Black couplers need to be connected as shown in the picture with Multimeter as well as the domestic
power socket.
OM TVS iQube Electric S - Rev 4 - As on 10 Nov 2023
Ac Socket
E
ON
ON
N
P
25