Table of Contents
Advertisement
Bluetooth parring
First time bluetooth paring
To pair your Android smart phone or iPhone with your
TVS iQube Electric S connected instrument cluster,
via Bluetooth, for the first time, follow the procedure
as described below :
1.
Switch 'ON' the vehicle.
2.
Instrument cluster can be in any mode for first
time pairing.
3.
Open the app and press the 'CONNECT'
tab,ensure the smart phone is near to the vehicle.
4.
The app searches for all Bluetooth devices near
by and displays the list of devices available.
5.
The connected instrument cluster's Bluetooth
name is prefixed by TVS IQUBE and followed
by alpha-numeric digits. Ex : 'TVS IQUBE
DEC3574'. This Bluetooth name can be found
by changing the cluster mode into BT pair mode.
6.
Now, select the 'TVS IQUBE DEC3574' in app to
initiate the pairing process.
7.
On pairing, a Bluetooth icon ' ', phone's battery
icon '
' and signal strength icon '
displayed on the speedometer's TFT display.
In Addition to this icons, will be displayed on
connected instrument cluster TFT display.
8.
For initiating first time pairing, logout from the
app, login again using your login credentials and
then press 'CONNECT'.
Note
During the course of pairing process, if there is any
occurrence of error, the connected instrument cluster
should be turned 'OFF' and 'ON', and the application
also need to be restarted.
Please remember that all the smart phones are not
compatible for pairing with the TVS iQUBE connected
instrument cluster.
During the search of Bluetooth devices in app, if the
vehicle connected instrument cluster's Bluetooth
device ID is not visible, try for one or two more
iterations.
OM TVS iQube Electric S - Rev 4 - As on 10 Nov 2023
Note
Any number of Android phones can be auto-paired
with the instrument cluster, but only one at any point of
time will be actively connected with the speedometer.
Only one iPhone can be auto-paired with a single
instrument cluster at a time. If the user need to connect
multiple iPhones with the single instrument cluster,
the previous connected iPhone has to be forgotten by
clicking, 'Forget This Device' from Bluetooth settings
in the iPhone.
If the vehicle battery is reset or fuse is blown, then
'Forget This Device' from Bluetooth settings.
Steps to "Forget This Device" in iPhone:
If the user needs to connect multiple iPhones with
the single instrument cluster, the previous iPhone
has to be forgotten using "Forget This Device" from
Bluetooth settings in the following manner:
' will be
55
Advertisement
Table of Contents
