Table of Contents
Advertisement
SELF - MAINTENANCE PROCEDURES
REAR BRAKE (DRUM BRAKE)
1. Measure the free play of the rear brake lever at the lever end as shown in the figure.
2. Free play of brake lever before the engagement of brake should be between 10 -15 mm.
3. If the measured distance is more than the limit, adjust the nut provided at the rear wheel end to obtain the
correct play.
10 ~ 15 mm
4. Turn the adjuster nut in clockwise direction for reducing free play or in anti-clockwise direction for increasing
the free play.
Caution
Ensure rear wheel can be rotated freely by hand after adjusting brake. If brakes are overtightened, range will be
reduced due to excess energy consumption. Replace the brake shoes as a set, if the wear limit indicator shows
beyond the wear limit even after indexing the lever.
REAR SHOCK ABSORBER
TVS iQube Electric S is provided with 3 step adjustable
rear shock absorbers to meet different road and load.
There are 3 notches for adjusting spring load.
If the spring is adjusted to the minimum notch, then
the shock absorber will be softer which is good for
light loads. If the spring is adjusted to maximum notch,
then it will be stiffer which is good for heavy loads.
OM TVS iQube Electric S - Rev 4 - As on 10 Nov 2023
Adjust the spring pre-load by shifting the adjuster
to the required notch according to the different load
conditions. The more you compress the spring, the
suspension becomes more stiff.
73
Advertisement
Table of Contents
