Controls - TVS iQube Electric S Manual

CONTROLS

Your TVS iQube Electric S comes with a pair of
identical control keys. These keys are to operate
ignition cum steering lock and seat lock.
IGNITION CUM STEERING LOCK
The ignition switch enables and disables the electrical
circuit and steering lock. The three positions of the
switch are described below.
1. 'OFF' position
All electrical circuits are deactivated. The key can
be removed from the lock.
2. 'ON' position
All electrical circuits are activated. Vehicle's
instrument cluster will wake up and the vehicle
can be shifted to drive mode.
Control key cannot be taken out from the lock in
this position.
OM TVS iQube Electric S - Rev 4 - As on 10 Nov 2023
3. 'LOCK' position
Your TVS iQube Electric S steering can be
locked in both 'left' and 'right' directions. Turn the
handlebar to the 'left' or 'right'. Press the key IN
and rotate it to the 'LOCK' position from 'OFF'
position.
All electrical circuits are deactivated and the
steering is locked. Control key can be removed
from the lock.
Insert the key into the lock and press the key IN
and turn it to 'OFF' or 'ON' position to unlock the
steering.
Note
Instrument cluster background illumination, front
position lamp, illuminating logo, automatic headlamp
on (AHO) and tail lamp glow automatically once the
ignition key is turned 'ON' without activating any other
switches.
Caution
Leaving the ignition cum steering lock in 'ON' position
for a prolonged time will drain the battery when the
vehicle is not in use. Switch OFF and take the key out
when the vehicle is not in use.
Always lock the steering while parking for safety.
Warning
Never attempt to move the vehicle when the steering
is locked, you may lose balance.
17