Resetting Lock To Factory Default; Factory Settings - Yale real Living Installation And Programming Instructions

Resetting Lock to Factory Default
When lock is reset to factory defaults all user
codes (including the Master PIN code*) are
deleted and all programming features are reset
to original default settings (see below).
1. Remove the battery cover and batteries.
2. Remove the interior escutcheon to access
the reset button.
3. The reset button (see image at right) is
located beside the PCB cable connector.
4. While pressing the reset button (minimum of
3 seconds) reinstall batteries. Release reset
button.
5. Replace battery cover.
Upon reset, Master PIN Code creation is the
only option available and must be performed
prior to any other programming of the lock.
Factory Settings
Settings
Master PIN Code
Automatic Re-lock
Inside Indicator Light
One Touch Locking
Privacy Button Setting
Audio Mode
Lockout Mode
Automatic Re-lock Time
Wrong Code Entry Limit
Shutdown Time
Interior Escutcheon
Factory Setting
Registration required*
Disabled
Disabled (Off)
Enabled
Disabled
Enabled
Disabled
30 Seconds
5 Times
60 Seconds
*The Master PIN code must be registered prior to any other programming of the lock.