Page 1
Yale Real Living ® ® Key Free Push Button Deadbolt B1 Installation and Programming Instructions Before you begin DOWNLOAD THE BILT APP for step-by-step installation instructions & to register your product #8-32 x 5/16" Machine screws #7 wood & #8-32...
Page 3
Installing Latch & Strike Plate 2-3/8" position d faut 2-3/4" position optional Pull Press Bolt must be in retracted (unlocked) position. Note horizontal orientation of mechanism. AYRD -110- STANDALONE INST FUL Rev D...
Page 4
Installing Keypad Escutcheon Inside of Door Outside of Door Bolt must be in retracted (unlocked) position. Note horizontal orientation of mechanism. AYRD -110- STANDALONE INST FUL Rev D...
Testing Operation Bolt must be in retracted (unlocked) position before installing batteries. AYRD -110- STANDALONE INST FUL Rev D...
Page 9
Handing the Lock Press . Press . Press . Enter new Master code (4-8 digits). Press to complete. After entering the Master code, press any key to complete handing. AYRD -110- STANDALONE INST FUL Rev D...
Installing Cover Congratulations, you've installed the Yale Real Living ® Key Free Push Button Deadbolt B1L! Turn sheet over for Programming Instructions to customize your product. AYRD -110- STANDALONE INST FUL Rev D...
Code must be created before any further programming. Max User Codes = 25 Warning: Changes or modifications to this device, not expressly approved by Yale Security Inc. could void the user's authority to operate the equipment. AYRD -110- STANDALONE INST FUL...
Creating User Codes Master code must be created first. *Max User Codes = 25 Enter Master code Press Press Press Press Enter 4-8 digit code Press Press AYRD -110- STANDALONE INST FUL Rev D...
Unlocking Door with Code Enter PIN Press "Unlock" Code Chart Duplicate if necessary PIN Code Management (Up to 25 Users) User Type User Name User # PIN Code Master User ___ User ___ User ___ User ___ User ___ User ___ User ___ User ___ User ___...
Resetting Lock to Factory Default When lock is reset to factory defaults all user codes (including the Master code*) are deleted and all programming features are reset to original default settings (see "Factory Default Settings"). 1. Remove the battery cover. 2.
Page 16
Definitions All Code Lockout Mode: This feature is enabled by the Master code. When enabled, it restricts all user (except Master) code access. When attempting to enter a code while the unit is in Lockout, the keypad flashes 8 times and the lock beeps 3 times as well. Audio Mode: Choosing Disable (3)
Feature Programming Through Menu Mode Using Master code* key. 1. Enter the 4-8 digit Master PIN code followed by the 2. Enter digit corresponding to the function to be performed followed by the key. *The Master code must be registered prior to any other programming of the lock.
Programming Troubleshooting Symptom Suggested Action • Press each keypad button for response when pressed. • Check batteries are installed and oriented correctly (polarity) Lock does not respond – in the battery case. door is open and • Check batteries are in good condition; replace batteries accessible.
Page 19
FCC: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 20
Product Support Tel 800.810.WIRE (9473) • www.yalelocks.com Yale Locks & Hardware is a division of Yale Security Inc., an ASSA ABLOY Group company. Yale® and Yale Real Living® are registered trademarks of Yale Security Inc., ASSA ABLOY Group company.
Need help?
Do you have a question about the AYRD110 and is the answer not in the manual?
Questions and answers