Advertisement
_
" '
_
'
"
_
"
[A] Using USB cable
[B] Using DV cable
(GR*D90/D70 only)
[A] Using USB cable (GR-D90/D70
only)
This camcorder can tra_lsfer still images to a PC via
USB connection.
[B] Using DV cable
It is also possibleto transfer still images to a PC with a
DV connector by using software equipped with the PC
or commercially available software.
1 Make sure the camcorder and PC are turned off.
2 Connect the camcorder to your PC using the
appropriate cable as shown in the illustration.
3 For GR*D90/D7O Owners: If you are using the USB
connection, set the VIDEO/DSC switch Oto "DSC".
4 Turn the camcorder's Power Switch _) to "PLAY"
while pressing down the Lock Button _) located on the
switch and turn on the PC.
• Refer to the instruction manual of the software on how
to transfer a still image to the PC.
5 When finished, turn off the PC first, then the
camcorder.
NOTES:
• Refer to _SOFTWARE
INSTALLATION
AND USB
CONNECTION
GUIDE" for the installation of the bundled
software and drivers.
• It Is recommended
to use the AC Adapter as the
power supply instead of the battery pack (;_
pg. 7).
• Never connect the USB cable and the DV cable
simultaneously
to the camcorder.
Connect only the
cable you wish to use to the camcorder.
• If the PC connected
to the camcorder
via the USB cable
is not powered, the camcorder
does not enter the USB
mode.
• The date/time
information
cannot be captured into the
PC.
• Refer to the instruction
manuals of the PC and Software.
• The still images can also be transferred to a PC with a DV
connector*equipped
capture hoard.
• When using a DV cable, be sure to use the optional
JVC VC-VDV206U
Or VC-VGV204U
GV cable depend-
ing on the type of GV connector (4 or 6 pins) on the
PC, Or use the GV cable provided with the capture
board.
• The system may nta work properly depending
on the PC
or capture board you are using.
• When using the DV connection
refer to manufacturer
instructions
of your capture board for driver's installation
and operation
instructions.
"ACCESSING
FILES" appears on the LCD monitor
while the PC is accessing
data in the camcorder
or the
camcorder
is transferring
a file to the PC.
NEVER disconnect
the USE; cable while
"ACCESSING
FILES" is displayed
on the LCD
monitor since this can result in product damage.
To USB
USB cable
(provided)
TO USB
CO_t_tector
PC
TO DV(_
OR
- Core filter
ov cable
(optional)
- Core filter
TO DV
CO_t _tector
PC with DV
coi3nectot
EN
SYSTEM CONNECTIONS
37
Advertisement
