Table of Contents
Advertisement
A
NEUVIDEO
IR Cable Pin Assignment/ IR Control System
IR Cable Pin Assignment
IR Control System
This product supports one-way IR control. When the matrix is connected to IR receiver cable and IR blaster cable, you can control
the corresponding input source devices through IR signal transmission remotely at the side of display devices. Four IR blaster cables
connected to the IR outputs must be placed near the four HDMI input sources. Four IR receiver cables connected to the IR inputs must be
placed near the display devices connected to the four HDMI outputs. IR matrix follows the HDMI matrix. For example, if HDMI INPUT3 is
selected for HDMI OUT1 to outout, the signal of IR OUT3 near the HDMI INPUT3 is emitted to IR IN1 near the HDMI OUT1. Now you can
use the IR remote of the DVD connected to HDMI INPUT3 to control it at the side of the TV connected to HDMI OUT1. Similarly, if HDMI
INPUT1 is selected for all HDMI OUT1/2/3/4 to outout, the signal of IR OUT1 near the HDMI INPUT1 is emitted to IR IN1/2/3/4 near the
four HDMI OUT.
6
Advertisement
Table of Contents
