Table of Contents
Advertisement
A
NEUVIDEO
EDID Management
EDID Management
This Matrix has 12 factory defined EDID settings, 2 user-defined EDID modes and 4 copy EDID modes. You can select defined EDID
mode or copy EDID mode to input port through front panel buttons, RS-232 control or Web GUI.
On-panel button operation: On the initial LCD display screen, press "MENU" button to enter the first level menu, press "UP/DOWN"
button to select INPUT, and then press the "ENTER" button. Now the EDID item appears. Press the "ENTER" button, and then press
"UP/DOWN" button to select the EDID mode you need. Then press "ENTER" button to confirm this operation.
RS-232 control operation: Connect the Matrix to PC with a serial cable, then open a Serial Command tool on PC to send ASCII command
"s input x EDID z!" to set EDID. For details, please refer to "EDID Setting" in the ASCII command list of "RS-232 Control Command".
Web GUI Operation: Please check the EDID management in the "Input page" of "Web GUI User Guide".
10
Advertisement
Table of Contents
