Table of Contents
Advertisement
A
NEUVIDEO
Network Page
You can do the following operations on the Network page:
1. Modify Network Setting: Modify the IP Mode/IP Address/Gateway/Subnet Mask/Telnet Port as required, click "Save" to save the
settings, and then it will come into effect.
Bind to Output: The AUDIO OUT (1~4) follows the HDMI OUTPUT (1~4).
For example, if HDMI INPUT 2 is connected to HDMI OUTPUT 1, the audio of
AUDIO OUT 1 is from HDMI INPUT 2; if HDMI INPUT 3 is connected to HDMI
OUTPUT 1, the audio of AUDIO OUT 1 is from HDMI INPUT 3.
Audio Matrix: you can select the audio of any HDMI input source for the
corresponding ext-audio out.
19
Web GUI User Guide
Advertisement
Table of Contents
