Table of Contents
Advertisement
A
NEUVIDEO
RS-232 Control Command
The product also supports RS-232 control. You need a serial cable with RS-232 male head and DB9 transfer USB male head. The RS-232
head of the serial cable is connected to the RS-232 control port with DB 9 at the rear of the Matrix, and the USB head of the serial cable
is connected to a PC. The connection method is as follows:
Then, open a Serial Command tool on PC to send ASCII command to control the Matrix. The ASCII command list about the product is
shown as below.
ASCII COMMAND
SERIAL PORT PROTOCOL. BAUD RATE: 115200, DATA BITS: 8BIT, STOP BITS:1, CHECK BIT: 0
X - PARAMETER 1, Y - PARAMETER 2, ! - DELIMITER
COMMAND CODE
SYSTEM SETTING
help!
r status!
r type!
r fw version!
s power z!
r power!
s beep z!
r beep!
s lock z!
r lock!
s lcd on time z!
r lcd mode!
s logo1
****************!
FUNCTION
List all commands
Get device current status
Get device mode
get firmware version
power on/off the device,
z=0~1 (z=0 power off,
z=1 power on)
get current power state
enable/disable buzzer
function, z=0~1 (z=0
beep off, z=1 beep on)
get buzzer state
lock/unlock front panel
button, z=0~1 (z=0 lock
off,z=1 lock on)
get panel button lock state
set lcd screen remain
on time, z=0~4 (0: off, 1:
always, 2: 15s, 3: 30s,
4: 60s)
get the backlight status of
lcd screen
set the logo name
displayed on the first line
of lcd screen,the max
character is 16
RS-232 Control Command
DESCRIPTION
EXAMPLE
help!
r status!
get the unit all status: power,
beep, lock, in/out connection,
video/audio crosspoint,
edid, scaler, network status
r type!
4x4 hdmi seamless matrix
r fw version!
mcu fw version: x.xx.xx
web gui: x.xx.xx
s power 1!
power on system initializing...
initialization finished!
mcu fw version x.xx.xx
r power!
power on /power off
s beep 1!
beep on
beep off
r beep!
beep on / beep off
s lock z!
panel button lock on
panel button lock off
r lock!
panel button lock on/off
s lcd on time 3!
lcd on 30 seconds
r lcd mode!
lcd always on
s logo1 Matrix
logo1:Matrix Switch
Swtich!
22
FEEDBACK DEFAULT
beep off
panel button lock off
lcd on 30 seconds
Advertisement
Table of Contents
