Matrix / routing switcher series rs-232 protocol table (10 pages)
Summary of Contents for A-Neu Video ANI-PS112
Page 1
ANI-PS112 HD/SD Digital Multi-Format Live Video Production Switcher A-NeuVideo.com Frisco, Texas 75034 (317) 456-2461 V2.0 AUDIO / VIDEO MANUFACTURER...
SAFETY INFORMATION To ensure the best results from this product, please read this manual and all other documentation before operating your equipment. Retain all documentation for future reference. Follow all instructions printed on unit chassis for proper operation. To reduce the risk of fire, do not spill water or other liquids into or on the unit, or operate the unit while standing in liquid. Make sure power outlets conform to the power requirements listed on the back of the unit.
NEUVIDEO INTRODUCTION & FEATURES INTRODUCTION This High Definition HD/SD digital A/V Mixer has (2) input BUSES, each with (6) inputs (2x HDMI’s, 2x Component and 2x S-Video/ Composite video) and also a Background Color feature for greater efficiency. The device has 1x HDMI, 2x Components / 2x S-Video or 2x Composite video output ports and also allows you to make adjustments to the position of your video.
NEUVIDEO CONNECTOR & INSTALLATION Rear Panel Connections Output Resolutions The output can select HD or SD system. Users can use SD PREVIEW to adjust the output system resolution, or a short cut is to press (2) keys for 1 second simultaneously. The combinations below: button + button = 480p60...
NEUVIDEO OPERATION CONTROLS & FUNCTIONS Position/Time Time Control: For adjusting the transition time of the Auto Fade and the Auto Wipe functions. Joystick Control: This joystick control has two functions; control the position of the square wipe pattern and P-IN-P picture. FUNCTIONS One-way wipe button Reverse wipe button...
NEUVIDEO OPERATION CONTROLS & FUNCTIONS Digital Effects A-bus digital effect ON button. A-bus Still button and OSD left adjust. A-bus Paint button and OSD right adjust. A-bus Negative button and OSD up adjust. A-bus Mosaic button and OSD down adjust. B-bus digital effect ON button.
NEUVIDEO OPERATION CONTROLS & FUNCTIONS AUDIO MIXER INPUT A: Controls the audio level of input A. INPUT B: Controls the audio level of input B. AUX: Controls the audio level of the Auxiliary input. MIC: Controls the audio level of the 3&...
NEUVIDEO OPERATION Basic Operation Turn the power switch at the rear panel to the ON Position. The LEDs on the panel will light up and the unit is now in initial mode for operation. Input Signal Selection and Background color Selection q →...
NEUVIDEO OPERATION VIDEO MIX q → Press the MIx button w → Press one of the A-bus selection button. e → Press one of the B-bus selection button. r → Mix effect will be controlled by video slide by sliding A to B or B to A. VIDEO WIPE Reset the operation panel to initial mode: q →...
NEUVIDEO OPERATION WIPE PATTERN Selection There are (6) wipe modes available can be selected as follows: q → Press the straight wipe button repeatedly to toggle through the available wipe patterns. (4) are available: Left to right, right to left, top to bottom and bottom to top. w →...
NEUVIDEO OPERATION Multiple Pattern Selection Reset the operation panel to initial mode: q → Press the WIPE button to place the unit in WIPE mode. w → Select a wipe pattern e.g. straight wipe by pressing button e → Press the MULTI button repeatedly to have the desired multiplication effect.
NEUVIDEO OPERATION Picture-In-Picture Reset the operation panel to initial mode: q → Move the Video Slider fully to the A or B-bus position. w → Press one of the A-bus selection buttons to select a source. e → Press one of the B-bus selection buttons to select a source. r →...
NEUVIDEO OPERATION Reset the operation panel to initial mode: How to use the LUMA KEY effect: q → Press the KEY button to place the unit in KEY mode. w → Press one of the A-bus selection buttons to select a source. e →...
NEUVIDEO OPERATION AUTO FADE/WIPE Selection Reset the operation panel to initial mode: q → Press the ON button to enter into AUTO FADE/WIPE mode. w → FADE/WIPE transition time can be adjusted with the TIME control e → Press the WIPE button to select the wipe effect.
NEUVIDEO OPERATION OSD ADJUST Reset the operation panel to initial mode: When turn off the OSD adjust in SD PREVIEW, output will show A/B-bus and output system information. As shown below. INFORMATION A INPUT: HDMI 1 SYSTEM: 1080i60 B INPUT: YPbPr 1 SYSTEM: 480p60 OUTPUT: NTSC F/W Version When turn ON the function in OSD PREVIEW, output will show the adjust screen.
Page 20
NEUVIDEO TERMS AND CONDITIONS OF USE PLEASE READ THE FOLLOWING TERMS AND CONDITIONS CAREFULLY BEFORE USING THIS HARDWARE, COMPONENTS AND SOFTWARE PROVIDED BY, THROUGH OR UNDER A-NeuVideo, INC (COLLECTIVELY, THE “PRODUCT”). By using installing or using the Product, you unconditionally signify your agreement to these Terms and Conditions.