Table of Contents
Advertisement
A
NEUVIDEO
If a user-defined mode is selected, you can do the following operations on this page:
• The four windows are all displayed by default.
• Each window can be dragged and zoomed at will.
• Drag and drop the input source to any window.
• Click Windows Setup buttons to set the display of the corresponding window.
• The window will be maximized and placed on the top with double-clicking. It will restore the previous status with double-clicking again.
Audio Page
In Audio page, you can select the input audio in Input Audio Select area, and set the ext-audio mode in Ext Audio Select area.
The ext-audio has three modes: Bind to Input, Bind to Output and Audio Matrix.
Note: The embeded audio can not be extracted to audio out channel to output.
You can select any input audio source from an HDMI input internal audio or an embeded
audio. For example, if "HDMI 1 Original" is selected, the audio source is from the internal
audio of HDMI Input 1; if "Embed 1" is selected, the audio source is from the Embed 1 audio.
(The embed audio follows HDMI INPUT, and it will be embeded in HDMI INPUT to output.)
Bind to Input: The AUDIO OUT (1~4) follows the HDMI INPUT (1~4). For
example, the audio of AUDIO OUT 1 is from HDMI INPUT 1. The audio of AUDIO
OUT 2 is from HDMI INPUT 2. The audio of AUDIO OUT 3 is from HDMI INPUT
3. The audio of AUDIO OUT 4 is from HDMI INPUT 4.
18
Web GUI User Guide
Advertisement
Table of Contents
