Table of Contents
Advertisement
A
NEUVIDEO
Input Page
You can do the following operations on the Input page:
1. Input: Input channel of the device.
2. Active: It indicates whether the channel is connected to a signal source. It is green if connected, and gray if not connected.
3. Name: The input channel's name. You can modify it by entering the corresponding name (max length: 31 characters) in the input box.
4. EDID: It indicates the current EDID of the device. You can click the drop-down menu to select other EDIDs.
After successful setting, it will prompt as follows:
6. Download EDID to your computer: If you want to download the existing EDID, click the drop-down box of "Select EDID File" to select
the input channel you want, and then click "Download" to save the corresponding EDID file to your computer.
5. Load EDID to user memory: Set EDID for the User. Click the "Browse" button, then select
the bin file. If you select the wrong EDID file, there will be a prompt, as shown in the following
figure.
13
Web GUI User Guide
Make sure to select the correct file, then you can check the name
of the selected file. Then select destination "User Define1/User
Define2", and click "Upload".
Advertisement
Table of Contents
