Table of Contents
Advertisement
A
NEUVIDEO
Web GUI User Guide
In matrix mode, you can select an output (1~4) firstly, and then select an input source (1~4) which will appear on the selected output area.
One route of video output configuration is completed.
Note: You can drag and drop any input source on the right to the corresponding output easily and quickly.
2. Video Wall: Click the buttons to select a splicing screen mode. There are 9 modes to be selected.
In video wall mode, you can select a window (1~4) firstly, and then select an input source (1~4) which will appear on the selected output
area. Click +/- to adjust the corresponding Horizontal/Vertical Bezel (0-10). Set the output resolution for current output by clicking the
drop-down list.
Note: You can drag and drop any input source on the right to the corresponding window easily and quickly.
3. Multi-Viewer: Click the buttons to select the multi-viewer display mode. There are 12 modes to be selected.
In multi-viewer mode, all the four HDMI outputs display the same image from the HDMI IN you selected. You can select the input source
which will appear on the corresponding window area. Then set the output resolution for current output by clicking the dropdown list. Output
Audio can be selected to follow any input source or the corresponding window as required.
17
Advertisement
Table of Contents
