Table of Contents
Advertisement
A
NEUVIDEO
If the Mode is "Static", you can set manually the IP Address/Gateway/Subnet/Telnet Port as required.
If the Mode is "DHCP", it will search and be filled with the IP Address assigned by the router automatically. You can't modify it now.
2. Modify User Password: Click the "User" button, enter the correct Old Password, New Password, and Confirm Password, and then
click "Save". After successful modification, there will be a prompt, as shown in the following figure:
Note: Input rules for changing passwords:
(1) The password can't be empty.
(2) New Password can't be the same as Old Password.
(3) New Password and Confirm Password must be the same.
3. Set the Default Network: Click "Set Network Defaults", there will be a prompt, as shown in the following figure:
System Page
Click "OK" to search the IP Address again. After searching is completed, it will
switch to the login page, the default network setting is completed.
20
Web GUI User Guide
Advertisement
Table of Contents
