Advertisement
Available languages
Available languages
ROUGH-IN INFORMATION:
FREESTANDING TUB
Model 2767
Note: An access panel must be
provided to facilitate the connection
of the drain to the drain/waste outlet.
Access must be made through the
floor below the tub.
Using the OS&B
Island Tub Drain or
®
similar product may eliminate the
need for an access panel. Refer to
the manufacturer's installation
instructions for details.
1
INSTALLATION INSTRUCTIONS:
Place the tub on a finished, level floor in the
desired location.
Using an erasable pencil or marker, trace the outline of
the base of the tub on the floor. (See Fig. 1)
2
Using the adjustable feet on the underside of the tub, ensure
that the tub is level.
Ensure that there is a gap between the tub base and the floor.
Gap shall not exceed 3/16" (5mm). (See Fig. 2)
11"
(280 mm)
4-3/8"
(110 mm)
ø2-1/8"
(ø55 mm)
5-1/8"
(130 mm)
17-3/8"
(440 mm)
63-3/16"
(1604 mm)
GENERAL SPECIFICATIONS FOR
2767 FREE STANDING BATH
INSTALLED SIZE
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW
BATHING WELL AT SUMP
44-7/8 x 16 In. (1140 x 406mm)
BATHING WELL AT RIM
63-3/8 x 25-1/2 In. (1610 x 648mm)
WATER DEPTH TO OVERFLOW
FLOOR LOADING
32 Lbs./Sq.Ft. (155 Kgs./Sq.m)
(PROJECTED AREA)
3/16" MAX
(5mm)
FINISHED FLOOR
3
69-5/8"
(1768 mm)
3-1/8"
(80 mm)
31-3/4"
(805 mm)
3-1/8"
(80 mm)
23-5/8"
(600 mm)
69-5/8 x 31-3/4 x 23-5/8 in.
(1768 x 806 x 600mm)
112 Lbs. (51 Kg.)
484 Lbs. (220 Kg.)
58 Gal. (220 L)
14-1/4 In. (362mm)
FIG. 1
FIG. 2
26-1/16"
(663 mm)
755021-100 Rev. 4 8/19
Advertisement
