American Standard Enfield Bathtub 2742.020 Installation Instructions Manual
American Standard Enfield Bathtub 2742.020 Installation Instructions Manual

American Standard Enfield Bathtub 2742.020 Installation Instructions Manual

Durabond construction high gloss acrylic fittings not included

Advertisement

Quick Links

Enfield Bathtub
2742.020, 2742.222
THANK YOU...
for selecting American Standard . . . the benchmark of fine quality for over 100 years. To ensure that
your installation proceeds smoothly--please read these instructions carefully before you begin. All you need to finish the
installation are your selected fittings. (Certain installations may require professional help.) Also be sure your installation
conforms to local codes.

GENERAL INSTALLATION INFORMATION

Carefully uncrate and inspect your new bath and tub frame for any
shipping damage. If such damage is found, report it to your vendor
immediately.
Protect all finished surfaces of the bath frame during construction
and installation using a drop cloth. If packaging foam is removed for
inspection purposes, save for frame installation procedure.
Fittings (bath filler, drain, and water supplies) are not provided with
the bath and must be ordered separately.
SUGGESTED LOCATION
FOR BATH FILLER
(MOUNTING HOLES
BY OTHERS)
5-3/4
(146mm)
36-3/4
(933mm)
14-1/4
(362mm)
C/L OF DRAIN
26-3/4
(679mm)
43-3/4
(1111mm)
CAST METAL DESIGN INSERTS
PANELED INSERTS
3
C/L OF
(76mm)
OVERFLOW
FINISHED
FLOOR
1-3/8 O.D.
6
TAILPIECE
(152mm)
SUPPORT LEGS
INSTALLER: PLEASE LEAVE THESE INSTRUCTIONS
WITH HOMEOWNER AS THEY PROVIDE IMPORTANT
CLEANING INFORMATION.
752846-100 Rev. C
73-3/4
(1873mm)
C/L OF 1/2 NPTS
SUPPLIES
7
(178mm)
H
C
3-1/2
(89mm)
OUTLINE OF
SKID RESISTANT
SURFACE
4-1/2
(114mm)
4-1/4
(108mm)
2
BATH RIM
(51mm)
25
(635mm)
1/2 N.P.T.S. INLETS
70 (1778mm)

Installation Instructions

FITTINGS NOT INCLUDED
List of Required Components (not included):
• 1593.170.295 Drain*
• 9116.017.295 Bath Filler*
• 9117.012.295 Water Supplies w/deck risers*
* Available at your American Standard Distributor
List of Required Tools and Supplies:
Tools:
• Drill
• Drill bits for wood or tile
• Level
• Tape Measure
• Pipe Wrench
• Crescent Wrench
• Slip Joint Pliers
• Screw Driver
• Standard Woodworking Tools
• Personal Safety Equipment
• Caulking Gun
• Torque Wrench with 1/2" Socket
• #2 Square Drive
Supplies
• Putty
• Painter's Tape
8
GENERAL SPECIFICATIONS FOR 2742 BATHING POOL
(203mm)
INSTALLED SIZE
14
(356mm)
WEIGHT
WEIGHT w/WATER
GAL. TO OVERFLOW.
BATHING WELL AT SUMP
BATHING WELL AT RIM
WATER DEPTH TO OVERFLOW
FLOOR LOADING
(PROJECTED AREA)
VIEW
PTS.
CUBE (FT
FOR AFTER-SALES SERVICE CALL 1 (800) 442-1902
WEEKDAYS.
© American Standard Inc. 2004
All product names listed herein are trademarks
of American Standard Inc. unless otherwise noted.
1
DuraBond™
Construction
HIGH GLOSS ACRYLIC
73-3/4 x 43-3/4 x 25 In.
(1873 x 1111 x 635mm)
41 x 21-1/2 In. (1041 x 546mm)
62 x 31-3/8 In. (1575 x 797mm)
36 Lbs./Sq. Ft. (174 Kgs/Sq. m.)
3
)
114 Lbs. (66 Kg.)
748 Lbs. (340 Kg.)
76 Gal. (288 L.)
15-3/4 In. (400mm)
27.8
55.7

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Enfield Bathtub 2742.020 and is the answer not in the manual?

Questions and answers

Summary of Contents for American Standard Enfield Bathtub 2742.020

  • Page 1: Installation Instructions

    2742.020, 2742.222 THANK YOU... for selecting American Standard . . . the benchmark of fine quality for over 100 years. To ensure that your installation proceeds smoothly--please read these instructions carefully before you begin. All you need to finish the installation are your selected fittings.
  • Page 2 1. Identify desired location of the tub. Please note: the floor area supporting the tub and frame must be capable of supporting a load in excess of 2000 lbs. The supplies and drain must not interfere with the floor joists (see rough-in for dimensions). 2.
  • Page 3 17. Attach the anti-tip bracket to the floor using the 1/4” - 20 socket head bolts and hex key wrench (see photo #5). 18. Repeat for the remaining brackets. Note - all brackets must have the opening pointing in the same direction. 19.
  • Page 4 34. Attach a screw in the bottom hole threading the screw into the slot. 35. Repeat steps 32 thru 34 on the inside of the leg. 36. Repeat for remaining legs. 37. Install the faucet and drain per manufacture’s instructions. 38.
  • Page 5 AMERICAN-STANDARD ENFIELD BATHTUB FURNITURE WARRANTY If inspection of this American-Standard plumbing product, within one year after its initial purchase, confirms that it is defective in materials or workmanship, American-Standard will repair or, at its option, exchange the product for a similar model. Variations in actual wood color and finishes which may result from natural characteristics of the wood, such as grain patterns, mineral streaks and the like, are not defects and are not covered by this warranty.
  • Page 6 AMERICAN STANDARD LIMITED WARRANTY ACRYLIC PRODUCTS American-Standard warrants to the original consumer purchaser that it will, at its option, repair or replace any of its plumbing products found by it to be defective under normal use and maintenance within the following periods from date of purchase: This limited warranty DOES NOT COVER the following: 1.
  • Page 7 9116 Series Bath Filler to the water supplies. Adjust centerline spacing of supports and water supply lines as needed to accommodate American Standard 9116 Series Bath Filler. Please refer to Bath Filler Installation Instructions for this dimension.
  • Page 8: Care And Cleaning

    NEVER use acids, abrasive scouring powders, detergents, or chemicals on brass fixtures! FOR AFTER-SALE SERVICE: In the United States: American Standard Inc. P.O. Box 6820 Piscataway, New Jersey 08855 Attention: Director of Consumer Affairs For residents of the United States, warranty...

This manual is also suitable for:

Enfield 2742.222

Table of Contents