Searching The Scene - Multi-Picture Search - Sony MICROMV DCR-IP5 Operating Instructions Manual

Searching the scene – Multi-picture
search
Using the multi-picture search function, you can display the thumbnails of all the top
scenes of moving pictures and still images recorded in the tape onto the index screen.
The recording date and title of each image or scene are also indicated. Select the
thumbnail you want to play back, then press the center z on the control button, the
camcorder starts searching the image or scene and play it back automatically. You can
also control this function using the Remote Commander.
(1) Set the POWER switch to VCR.
(2) Select FN, then press the center z on the control button. The PAGE1 screen
appears.
(3) Select MULTI SRCH, then press the center z on the control button. The
MULTISRCH screen appears.
(4) Select </,, then press the center z on the control button. The camcorder
starts scanning toward the selected direction. When you select ,, the
thumbnails are displayed from the upper-left window, and when you select
<, they are displayed from the lower-right window. After the scanning is
completed, the upper-left window turns black and the thumbnails will be
displayed on the index screen.
2
FN
3,4
MULTI SRCH
DIRECTION
[a] The picture being fast-forwarded or rewinded
[b] The blue portion indicates the range of a scanning to display thumbnails
END
[a]
SELECT
MULTI SRCH
MULTI SRCH END
[b]
1
POWER
CAMERA
MEMORY/
(CHG)
NETWORK
OFF
VCR
ON
MODE
71