Searching For The Startingpoint; Searching For The Last Scene Of The Most Recent Recording - End Search; Searching Manually - Edit Search - Sony Handycam DCR-HC20 Operation Manual

Searching for the
startingpoint
--4 Touch [i_1.
POWER switch
To cancel the operation
Touch [END SClt] again.
_,€ Note
• The END SEARCH fhnction will hal work correcdy
when lher¢ is a blank section between recorded
seclions on 1he tape.
"_" Tip
• When the PLAY/EDIT mode is sclccted, you can do
INs operalion.
This function is handy when you have played
back the tape, for example, but want to start
recording right after the most recently
recorded scene. When you use a cassette
without Cassette Memory, the END
SEARCH function will not work once you
eject the cassette after you have recorded on
the tape. if you use a cassette with Cassette
Memory, it will function even when you have
ejected the cassette.
__ _ Slide the POWER switch to select the
CAMERA mode.
__ Touch _ to display [PAGEI].
_d$_Touch [END SCH].
The lasl scene of the most recenl recording
is played back for about 5 seconds, and the
camcorder enters ll_e standby mode at the
poinl where |he last recording has finished.
You can search for the start point while
viewing the pictures on the screen. The sound
is not played back during the search.
__ _ Slide the POWER switch to select the
CAMERA mode.
__ Touch _ to display IPAGE1].
_3 Touch MENU.
_4 Select _ (CAMERA SE'[), then
select [EDITSEARCH] with _ /
E131, then touch IEXEC[.
__ Select [ON], then touch [EXEq.
__ Touch [IX].
Keep touching _ (to go
backward)/E_] (to go forward) and
release it at the point where you want
to start recording.
321
Recording