Table of Contents
Advertisement
Writing a print mark – PRINT MARK
– DCR-IP7/IP7BT only
You can specify the recorded still image to print out by putting marks. This function is
useful for printing out still images later.
Your camcorder conforms with the DPOF (Digital Print Order Format) standard for
specifying the still images to print out.
Before operation
Insert the "Memory Stick" into your camcorder.
(1) Set the POWER switch to MEMORY or VCR.
(2) In MEMORY mode, go to step 3.
(3) Select INDEX, then press the center z on the control button.
(4) Select
(5) Move the B mark to the image you want to write a print mark, then press the
(6) Repeat step 5 to write print marks on other images.
(7) After writing all the print marks, select EXIT, then press the center z on the
To cancel writing print marks
Select the image you want to cancel the print mark, then press the center z on the
control button again in step 5. The
If the write-protect switch on the "Memory Stick" is set to LOCK
You cannot write print marks on still images.
Moving pictures
You cannot write print marks on moving pictures.
154
In VCR mode, select
The index screen appears.
MARK, then press the center z on the control button. The screen for
writing a print mark appears.
center z on the control button.
The
mark appears on the selected image.
control button. The FN screen appears.
3
INDEX
4 – 6
MARK
PB, then press the center z on the control button.
-MARK
MARK
DEL
EXIT
1
2
3
4
5
6
T
t
1 / 40
mark disappears from the image.
1
POWER
CAMERA
MEMORY/
(CHG)
NETWORK
OFF
VCR
ON
MODE
RET.
MARK
EXIT
1
2
3
4
5
6
T
t
2 / 40
Advertisement
Table of Contents
