Sony MICROMV DCR-IP5 Operating Instructions Manual page 92

Superimposing a title
Superimposing a title on the recorded tape
The title is recorded for about 5 seconds from the recording start point.
(1) Set the POWER switch to VCR.
(2) Select FN, then press the center z on the control button. The PAGE1 screen
(3) Select TITLE, then press the center z on the control button. The TITLE screen
(4) Select INPUT TITLE, then press the center z on the control button. The INPUT
(5) Select </,, then press the center z on the control button. The camcorder
(6) Select the thumbnail you want to superimpose a title, then press the center z
(7) Perform steps 4 to 6 in "Superimposing a title on starting a recording" on page
(8) Select SAVE TITLE, then press the center z on the control button.
2
FN
1
POWER
CAMERA
MEMORY/
NETWORK
VCR
92
appears.
appears.
TITLE screen appears.
starts scanning toward the selected direction. When you select ,, the
thumbnails are displayed from the upper-left window, and when you select
<, they are displayed from the lower-right window. After the scanning is
completed, the thumbnails are displayed on the index screen.
on the control button. The title menu appears.
XX.
The "TITLE SAVE" indicator appears on the screen for about 5 seconds and
the title is set.
(CHG)
OFF
ON
MODE
3
TITLE
INPUT
TITLE
TITLE
SET
4,5
INPUT TITLE
SELECT
DIRECTION
6–8
END
END INPUT TITLE END