Table of Contents
Advertisement
Recording a picture
Self-timer recording
Recording with the self-timer starts in 10 seconds automatically. You can also use the
Remote Commander for this operation.
(1) In standby mode, select FN, then press the center z on the control button. The
(2) Select SELF TIMER, then press the center z on the control button. The
(3) Press DISPLAY to turn off the screen buttons.
(4) Press START/STOP.
To stop the count down
Press START/STOP. To restart the countdown, press START/STOP again.
To record still images on a tape using the self-timer
Press PHOTO in step 4 (p. 41).
To cancel the self-timer recording
Select SELFTIMER, then press the center z on the control button in standby mode. The
(self-timer) indicator disappears from the screen.
Note
The self-timer recording mode is automatically canceled when:
– The self-timer recording is finished.
– The POWER switch is set to OFF (CHG) or VCR.
When the POWER switch is set to MEMORY (DCR-IP7/IP7BT only)
You can also record a still image on the "Memory Stick" with the self-timer (p. 125).
36
PAGE1 screen appears.
timer) indicator appears.
Self-timer starts counting down from 10 with a beep sound. In the last 2
seconds of the countdown, the beep sound gets faster, then recording starts
automatically.
START/STOP
1
FN
2
PAGE1 PAGE2 PAGE3 EXIT
MENU
FADER
SELF
TIMER
FOCUS
MEM
EXPO–
MIX
SURE
(self-
4
3
Advertisement
Table of Contents
