Product Compliance Canada - Barco ClickShare CX-20 Gen2 User Manual

Table of Contents

Advertisement

Regulatory information
Base Unit contains FCC ID: PPQ-WCBN814A
Button FCC ID (model R9861600D01C): 2AAED-R9861600D01
Button FCC ID (model CSBTN004): 2AAED-CSBTN004
ClickShare Button 2AAED-R9861600D01 has been tested and meets the FCC RF exposure guidelines. The
maximum SAR value reported is 1.19 W/kg..
ClickShare Button 2AAED-CSBTN004 has been tested and meets the FCC RF exposure guidelines. The
maximum SAR value reported is 0.47 W/kg.
ClickShare Button 2AAED-R9861600D01 or 2AAED-CSBTN004 should be installed and operated with a
minimum distance of 5 mm between the radiator and your body.
FCC responsible: Barco Inc., 3059 Premiere Parkway Suite 400, 30097 Duluth GA, United States, Tel: +1
678 475 8000
For country code selection usage (WLAN devices) :
Note: The country code selection is for non-US model only and is not available to all US model. Per FCC
regulation, all WiFi product marketed in US must fixed to US operation channels only.
A.2.3 Product compliance Canada
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference, including interference that may cause undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Barco Wireless Device is below the Industry Canada (IC) radio frequency
exposure limits. The Barco Wireless Device should be used in such a manner such that the potential for
human contact during normal operation is minimized.
Caution: Exposure to Radio Frequency Radiation.
1. To comply with the Canadian RF exposure compliance requirements, this device and its antenna must not
be co-located or operating in conjunction with any other antenna or transmitter.
2. To comply with RSS 102 RF exposure compliance requirements, a separation distance of at least 20 cm
must be maintained between the antenna of this device and all persons.
Base Unit contains FCC ID: 4491A-WCBN814A
Button IC (model R9861600D01C): 21559-R9861600D01
Button IC (model CSBTN004): 21559-CSBTN004
ClickShare Button 21559-R9861600D01 has been tested and meets the IC RF exposure guidelines. The
maximum SAR value reported is 1.19 W/kg.
ClickShare Button 21559-CSBTN004 has been tested and meets the IC RF exposure guidelines. The
maximum SAR value reported is 0.47 W/kg.
ClickShare Button 21559-R9861600D01 or 21559-CSBTN004 should be installed and operated with a
minimum distance of 5 mm between the radiator and your body.
IC Antenna statement
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and
maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio
interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically
radiated power (e.i.r.p.) is not more than that necessary for successful communication.
This radio transmitter 4491A-WCBN814A has been approved by Industry Canada to operate with the antenna
types listed below with the maximum permissible gain and required antenna impedance for each antenna type
indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for
that type, are strictly prohibited for use with this device.
50
R5900114 /01
ClickShare CX-20 Gen2

Advertisement

Table of Contents
loading

This manual is also suitable for:

C3010s

Table of Contents