Supply Unit - Greencut GS2500 10 Operating Instructions Manual

SUPPLY UNIT

1. Unscrew and remove the fuel cap. Place the lid on a dust free.
2. Place the fuel inside the tank to 80% of total capacity.
Warning!
1. Select bare ground for fueling.
2. Move at a distance of at least 3 meters (10 feet) from the fueling point before
starting the engine.
3. Stop the engine before refueling the unit. Make sure to shake the mixture
properly.
TO CONTRIBUTE TO THE LIFE OF THE ENGINE, AVOID:
1. Free oil fuel (raw gasoline) this quickly causes serious damage to internal engine parts.
2. Gasohol. This can cause deterioration of rubber parts and / or plastic parts and disruption of
engine lubrication.
3. Oil for use in 4-stroke engines. This can cause fouling of the spark plug, blocking the
exhaust port or the piston ring.
4. Mixed fuels which have been left unused for a period of one month or more may clog the
carburetor and cause a failure causing the engine malfunction.
5. In case of storing the product for a period of time, clean the fuel tank after it empty. Then,
turn the engine and empty the carburetor of the composite fuel.
6. In case of scrapping the oil tank mixing, do it only at an authorized repository site.
Note
For details on quality assurance, read the description in the section Limited
Warranty. Moreover, the normal wear and change in product with no functional
influence are not covered by warranty. Also beware if the instructions in the section
on the use are not observed as the mixture of gasoline, etc. This may not be
covered by the warranty.
EN I 67