Greencut GS7200 Instruction Manual page 78

78 I EN
WARNING
- Make sure you have strong support for the feet before starting work. Do not use
stairs.
- Do not stretch to cut the branches of a tree.
- Do not cut to a height greater than their own shoulders.
- Always hold the greencut firmly with both hands.
MAINTENANCE
Before attempting to clean, inspect or repair this unit make sure the engine is off and cool.
Disconnect the spark plug wire to prevent the engine from starting accidentally.
MAINTENANCE AFTER EVERY USE
1. Air filter
Loosen the knob and remove the air filter cover. Remove the filter element and remove impurities. If
the filter is clogged, remove it and wash it in half while shaking it in gasoline.
NOTE
When servicing the air filter, make sure you cover the air intake hole with a rag.
2. Oil filler
Turn off the guide bar and check the oil filler port is not blocked.
3. Guide bar
Remove the guide bar and saw dust shake off the groove of it and the oil filler.
Lubricating the sprocket by the lubrication hole located at the end of the guide bar.
Lubrique la rueda de cadena por medio del orificio ubicado al final de la espada.
4. Others
Check for fuel leaks or loose connections. Examine the main parts for any signs of damage, especially
the joints of the handles and the mounting of a guide bar. If there are defects, ensure that necessary
repairs are made to use this unit again.
Oil fille valve