FiT REMOTE DISPLAY Instruction Manual page 46

Table of Contents

Advertisement

INSTRUCTION MANUAL
Error code
Error message displayed
68-01, 68-05,
Battery current error
68-06, 68-07,
Discharging error
68-09, 68-16,
68-17, 68-18,
68-19, 68-1A
68-02, 68-03,
Battery current error
68-08, 68-0A
Charging error
68-04, 68-11,
Battery current error
68-12
Short circuit
68-0B, 68-13
Battery current error
Overcurrent error
68-14
Battery current error
Start error
68-15
Battery current error
69-01, 69-08
Battery temperature error
69-02, 69-09
Battery temperature error
69-03, 69-0C
Battery temperature error
FIT_Manual_Remote_Display_Pinion_V3_en | Version 03 | 24.10.2023
FIT REMOTE DISPLAY PINION
Action / Restriction
1. Switch the system off.
2. Remove the battery.
3. Re-insert battery.
4. Start the system.
5. If the problem persists, please contact your
specialist dealer.
1. Disconnect the charger from the battery.
2. Reconnect the charger and start charging.
3. If the problem persists, please contact your
specialist dealer.
1. Switch the system off.
2. Remove the battery.
3. Re-insert battery.
4. Start the system.
5. If the problem persists, please contact your
specialist dealer.
1. Switch the system off.
2. Remove the battery.
3. Re-insert battery.
4. Start the system.
5. If the problem persists, please contact your
specialist dealer.
1. Switch the system off.
2. Remove the battery.
3. Re-insert battery.
4. Start the system.
5. If the problem persists, please contact your
specialist dealer.
1. Switch the system off.
2. Remove the battery.
3. Re-insert battery.
4. Start the system.
5. If the problem persists, please contact your
specialist dealer.
1. Disconnect the charger from the battery.
2. Allow the battery to cool down (> 60 minutes).
3. Restart the charging process.
4. If the problem persists, please contact your
specialist dealer.
1. Turn off the e-bike.
2. Allow the battery to cool down (> 60 minutes).
3. Start the system.
4. If the problem persists, please contact your
specialist dealer.
1. Bring the battery to a warmer place.
2. Allow the battery to warm up (> 30 minutes).
3. Restart the charging process.
4. If the problem persists, please contact your
specialist dealer.
46

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the REMOTE DISPLAY and is the answer not in the manual?

This manual is also suitable for:

PinionPinion te1500093501103501263501264

Table of Contents