INSTRUCTION MANUAL
Error code
Error message displayed
1C-xx
Bluetooth module error
1D-xx
EMS mode active
1E-xx
OEM mode active
1F-xx
TEST mode active
20-xx
Reserve mode active (info text)
21-xx
Lock error
22-xx
Full charge cycle active
23-09
Tire pressure sensor error
Battery weak front
23-0A
Tire pressure sensor error
Battery weak rear
23-0B
Tire pressure sensor error
Battery weak front right
23-0C
Tire pressure sensor error
Battery weak rear right
23-xx
Tire pressure sensor error
24-01
Charger multi-battery error
25-xx
1-Wire communication error
26-xx
Battery lock (ABUS) error
FIT_Manual_Remote_Display_Pinion_V3_en | Version 03 | 24.10.2023
FIT REMOTE DISPLAY PINION
Action / Restriction
1. Restart the system.
2. Restart FIT E-Bike Control (app), update if
necessary.
3. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Charge the battery.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
Information: Battery is charged for calibration
despite Long Life mode 100%.
Sensor needs to be replaced soon, please contact
your specialist dealer.
Sensor needs to be replaced soon, please contact
your specialist dealer.
Sensor needs to be replaced soon, please contact
your specialist dealer.
Sensor needs to be replaced soon, please contact
your specialist dealer.
Sensor may need to be replaced, please contact
your specialist dealer.
1. Charge each battery individually.
2. Have the charger software update done at your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
42
Need help?
Do you have a question about the REMOTE DISPLAY and is the answer not in the manual?