FiT REMOTE DISPLAY Instruction Manual page 40

INSTRUCTION MANUAL
Error code Error message displayed
16-0B Lock theft detection
17-00 Remote defective component
17-01 Motor defective component
17-02 Display defective component
17-03, 17-04, Battery defective component
17-05, 17-06
17-07 Speed node defective component
17-08 Gears defective component
17-0A Charger defective component
17-0B Lock defective component
18-00 Remote start error
18-01 Motor start error
FIT_Manual_Remote_Display_Pinion_V3_en | Version 03 | 24.10.2023
FIT REMOTE DISPLAY PINION
Action / Restriction
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. Switch the system off.
3. Remove display from holder, check contacts and
clean if necessary.
4. Re-insert the display and start the system.
5. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. Switch the system off.
3. Remove the battery from the holder, check
contacts and clean if necessary.
4. Re-insert the battery and start the system.
5. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. Switch the system off.
3. Disconnect the charger from the system and
socket.
4. Wait until status LED goes out.
5. Check plug contacts on the e-bike and charger
and clean if necessary.
6. Reconnect the charger to the socket.
7. Reconnect the charger to the system and start
the system.
8. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
40