FiT REMOTE DISPLAY Instruction Manual page 29

INSTRUCTION MANUAL
Vibration feedback
The vibration can be set as feedback from the control unit in the vibration feedback menu. The following setting
options are available:
Selection
Off
On
Only for messages
Motor cut-off during braking
In the menu Motor cut-off during braking, you can choose whether or not motor assistance should switch off auto-
matically during braking. This function is only available for S-Pedelecs.
Disable menu display
In the Disable menu display menu, you can select whether, during the trip, the selection display appears while switch-
ing between the main displays or whether you want to switch directly between the main displays. This function is
only available with the Remote display.
Pushing aid speed
The speed of the pushing aid function can be set in the Pushing aid speed menu. While using the pushing aid, the
pushing aid speed can be temporarily reduced / increased via the buttons on the TE1 trigger.
Menu – Charge
The desired charging mode as well as the LONG LIFE mode for the battery can be set in the Charge menu.
Charging mode
Normal
Fast
Long Life
Menu – Messages
The list of current error messages can be viewed in the messages menu.
Menu – About
The About menu shows the software version and settings of the individual system components. Motor shows, for
example, the maximum torque and whether a motor upgrade has been activated.
FIT_Manual_Remote_Display_Pinion_V3_en | Version 03 | 24.10.2023
Description
No vibration feedback
Every button press / active message generates vibration feedback
Vibration feedback is only generated for messages
Description
Normal charging
Fast charging
If the battery is used in LONG LIFE mode, there is slightly less capacity available. On the
other hand, the battery retains its capacity for longer. The LONG LIFE mode is available
for both normal and fast charging.
FIT REMOTE DISPLAY PINION
29