FiT REMOTE DISPLAY Instruction Manual page 28

INSTRUCTION MANUAL
Date
You can set the current date in the date menu. The current digit can be changed by pressing the plus / minus button.
Select the number to be changed with the selection rocker switch. Press the selection rocker switch to save the date
and quit the menu. Press "Cancel" to leave the menu without saving the changes.
Units
You can switch between the metric and imperial system in the units menu. The following units are replaced:
Measured value
Distance
Speed
Energy consumption
Temperature
Elevation
Menu – Connectivity
Information on the availability and use of add-on devices that can be connected can be found on the e-bike manu-
facturer's website.
Menu – My Bike
The user-related settings for the e-bike can be carried out in this menu.
Altitude calibration
The altimeter is calibrated in the calibration menu.
Important: The altitude measurement depends on the atmospheric pressure and can lead to deviations if this
changes. We recommend that you carry out a calibration if the weather changes.
Auto. backlighting
You can choose between the automatic adjustment of the display's backlighting to the ambient light (ON) or a manual
setting of the backlighting (OFF) between 10 and 100% in this menu. Pressing the selection rocker switch saves the
selected backlight and exits the menu. Clicking Cancel exits the menu without saving any changes.
INFO-CIR
NOTICE
If the display gets too hot, the backlighting is automatically reduced to 20 %.
This is a precautionary measure to prevent temporary discoloration on the display. When the tem-
perature has fallen back to normal, the brightness automatically switches back to the previously set
value.
Power off
The Power off menu can be used to set the time after which the system switches off automatically when not in use.
FIT_Manual_Remote_Display_Pinion_V3_en | Version 03 | 24.10.2023
Metric Imperial
km mi
km/h mph
Wh/km Wh/mi
°C °F
m.a.s.l. FAMSL
FIT REMOTE DISPLAY PINION
28