FiT REMOTE DISPLAY Instruction Manual page 43

INSTRUCTION MANUAL
29-xx up to 47-xx
Error code Error message displayed
29-xx Display communication error
2A-xx Display software error
2B-xx Display authentication error
2C-xx Display internal error
2D-xx Display identification error
2E-01 Display overheated
Screen brightness reduced
48-xx 66-xx (Pinion)
Error code Error message displayed
48-xx Motor communication error
49-07 Motor error
E-bike battery not ready
FIT_Manual_Remote_Display_Pinion_V3_en | Version 03 | 24.10.2023
FIT REMOTE DISPLAY PINION
Action / Restriction
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. Switch the system off.
3. Remove display from holder, check contacts and
clean if necessary.
4. Replace the display and start the system.
5. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. Switch the system off.
3. Remove display from holder, check contacts and
clean if necessary.
4. Replace the display and start the system.
5. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. If the problem persists, please contact your
specialist dealer.
1. Restart the system.
2. Switch the system off.
3. Remove display from holder, check contacts and
clean if necessary.
4. Replace the display and start the system.
5. If the problem persists, please contact your
specialist dealer.
1. Cool display by riding.
2. Protect the display from direct sunlight.
Action / Restriction
1. Check plug contacts on the battery and bicycle
and clean if necessary.
2. Restart the system.
3. If the problem persists, please contact your
specialist dealer.
1. Switch the system off.
2. Remove the battery.
3. Check plug contacts on the battery and e-bike
and clean if necessary.
4. Insert the battery.
5. Restart the system.
6. If the problem persists, please contact your
specialist dealer.
43