Information For Scrubber Dryer - Numatic NX 1K Original Instructions Manual

Information for Scrubber Dryer

COMPONENT
Mains Lead
Brushes
Squeegee Blade
Filters
Tanks
Operators shall be adequately instructed as to the correct use of the machine.
As with all electrical equipment care and attention must be exercised at all times during its use, in addition to ensuring that
routine and preventative maintenance is carried out periodically in order to ensure its safe operation.
WARNING
Failure to carry out maintenance as necessary, including the replacement of parts to the correct standard
could render this equipment unsafe and the manufacturer can accept no responsibility or liability in this respect.
When ordering spare parts always quote the Model Number / Serial Number specifi ed on the Rating Plate.
Do not use on cleaning surfaces having a gradient exceeding that marked on the machine. While on ramps or inclines, avoid sudden
stops. Avoid sharp turns. Use low speed down ramps. Clean only while descending (driving down) the ramp.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge. Children should be supervised to ensure that they do not play with the appliance.
When detergents or other liquids are used, read the manufacturer's instructions.
Only use brushes provided with the appliance or those specifi ed in the instruction manual.
The use of other brushes may impair safety.
A full range of brushes and accessories are available for this product.
Only use brushes or pads which are suitable for the correct operation of the machine for the specifi c task being performed.
It is essential that this equipment is correctly assembled and operated in accordance with current safety regulations.
When using the equipment always ensure that all necessary precautions are taken to guarantee the safety of the operator and
any other persons who may be aff ected.
Wear nonslip footwear when scrubbing. Use a respiratory mask in dusty environments.
The machine, while charging, must be positioned so that the mains plug is easily accessible.
When cleaning, servicing or maintaining the machine, replacing parts or converting to another function the power source shall be switched off .
Mains operated machines shall be disconnected by removing the power plug, and battery operated machines shall be disconnected by
using top ON/OFF button on the battery.
In order to prevent unauthorised use of the machine the power key must be removed after use.
Machines left unattended shall be secured against unintentional movement.
When detergents or other liquids are used, read the manufacturer's instructions.
This machine shall be stored indoors only
This machine is for indoor use only.
CAUTION
NOTES:This machine is intended for commercial use, for example in hotels, schools, hospitals, factories, shops, offi ces and
rental businesses.
• Ensure only competent persons unpack/assemble the machine.
• Keep your machine clean.
• Keep your brushes in good condition.
• Replace any worn or damaged parts immediately.
• Regularly examine the power cord for damage, such as cracking or ageing. If damage is found, replace the cord before
further use.
• Only replace the power cord with the correct Numatic approved replacement parts.
DO
• Ensure that the work area is clear of obstructions and / or people.
• Ensure that the working area is well illuminated.
• Pre-sweep the area to be cleaned.
• Use steam cleaners or pressure washers to clean the machine or use in the rain.
• Attempt machine maintenance or cleaning unless the power plug has been removed from the supply outlet.
• Allow any inexperienced repairs. Call the experts.
• Strain cable or try to unplug by pulling on cable.
• Leave the brush pad on the machine when not in use.
• Allow the machine to be used by inexperienced or unauthorised operators or without appropriate training.
• Use the machine without the solution tanks properly positioned on the machine, as shown in the instructions.
DON'T
• Expect the machine to provide trouble-free, reliable operation unless maintained correctly.
• Run the machine over power cable during operation.
• Lift or pull the machine by any of the operating triggers, use the main handle.
• Remove the handle from the machine except for service and repair.
INTERVAL
DAILY
DAILY
BEFORE EACH USE
BEFORE EACH USE
AFTER EACH USE
16
READ MANUAL BEFORE USE
INSPECT FOR
Scuffi ng, cracks, splits, conductors showing
Bristle damage, wear, drive collar wear
Wear, cracks, splits
Clogging and debris retention
Rinse dirty water tank after use