Rtl8100B Lan Driver On Windows Nt4.0 - SOLTEK 75FRV Manual

75FRV / 75FRV-L

3-6-2. RTL8100B LAN driver on Windows NT4.0

1. When you newly install Win NT4, the Setup program will ask you
whether your computer will participate on a network. please check
"Do not connect this computer to a network at this time" and continue
with your installation. That means, you are going to install the LAN
Adapter and driver after you have finished system installation. By
this way, you will set up your LAN Adapter and driver more surely.
2. If you have now installed Win NT4 in your computer, please boot
your system and in the "Start" screen click the following path to install
your computer networking:
\Start\Settings\Control Panel\Network (double click)
3. Instantly, a dialog box pops up, asking you, "Windows NT Networking
is not installed. Do you want to install it now?" Please click "Yes" to
continue.
4. The Network Setup Wizard will then proceed to guide you to the
installation of LAN Adapter and Driver, until the "Select Network
Adapter" screen pops up, on which you should click "Have Disk" to
install the on-board RTL8100B LAN Controller.
5. Instantly, the "Insert Disk" dialog box pops up. You should now insert
the Support CD into your CD-ROM drive, and then type to the white
bar the correct path for the location of the LAN driver. Supposing
your CD-ROM drive is drive D, please type the following path:
D:\Driver\Network\RTL8139\Winnt4 and click "OK" button to
continue. (Controller RTL8100B is supported by Driver RTL8139)
6. Instantly, the Setup program detects the "Realtek RTL8139(A/B/C/
8130) PCI Fast Ethernet Adapter" and shows it on the "Select OEM
Option" screen. Please click "OK" to continue.
7. The Setup program will then proceed to install the RTL8139 Adapter
and then other networking components such as TCP/IP protocol.
8. During the setup process, if "windows NT Setup" needs to copy
some Windows files, you should then withdraw the Support CD and
insert back the Win NT4 CD-ROM into your CD-ROM drive to
continue.
9. After you have finished other networking components setup, you
should restart your syustem to put all the new setups into effect.
52