2-8.3 Jp1: Overheated Cpu Shutdown - SOLTEK 75FRV Manual

2-8.3 JP1: Overheated CPU Shutdown

JP1 is designed to enable the overheat safeguard for some CPUs which
are incorporated with a protective thermal diode. The latest AMD Athlon
XP and Duron Morgan CPUs are incorporated with such thermal diode
and can be protected by this function. Setting JP1 1-2 closed (default
setting) will shut down the system when the above-mentioned CPUs
o
get to 85 C (the default protection temperature.) Only when the CPU
returns to a cooler state can you restart your system.
For other CPUs that are not incorporated with a protective thermal diode,
please set JP1 2-3 closed to disable the function because it is a vain
design now.
Reminder: If a sudden shutdown happens to your system which has
been running well for a while with an AMD Athlon XP/Duron Morgan
CPU, this might be caused by the "Overheated CPU Shutdown" design.
Please use a better CPU cooling fan and restart your system.
JP1
Overheated CPU Shutdown
(only for Athlon XP/
Duron Morgan)
1
1-2 closed (default)
overheated CPU (85
shutdown function
Enabled
1
2-3 closed
overheated CPU
shutdown function
Disabled
27
Chapter 2 Hardware Setup
o C)