Chapter 1 Introduction - Emerson Rosemount 2410 Instruction Manual

Manual Supplement
00809-0800-2410
1 Introduction
The purpose of this document is to provide guidelines on how to change from other
manufacturer's devices to Rosemount equipment by exchanging gauges. When a gauge is
replaced with a Rosemount gauge, it is necessary to configure the Rosemount 2410 Tank
Hub for emulation.
The Rosemount field devices, for example Rosemount 5900 Radar Level Gauge and
Rosemount 2240S Temperature Transmitter, are connected to the tank hub using the
intrinsically safe Tankbus as usual. Emulation is done in the tank hub only. Each tank hub
can emulate up to 10 tanks (10 separate gauges)
Figure 1-1: Rosemount Devices Replacing Old Gauges in an Existing Sakura System
A. Existing Sakura host
B. Existing data polling unit
C. Rosemount 2410 Tank Hub
D. Sakura gauges
E. Rosemount 5900S Radar Level Gauge
F. Rosemount 2240S Temperature Transmitter with sensor
G. Rosemount 3051S Pressure Transmitter
(1) Tank hub version "Multiple tanks" can emulate up to 10 tanks (10 gauges). Tank hub version "Single tank" can
emulate up to 2 tanks (2 gauges).
Emerson.com/Rosemount
F E
G
(1) .
A
B
C
Introduction
August 2023
D
D
5