Download Print this page

Table Of Contents; Introduction - Emerson VLS**435A Operating Instructions Manual

Vibrating level switch

Advertisement

Mobrey Series VLS
March 2018
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3
Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 8
1.0

Introduction

1.1
Overview
Mobrey vibrating rod level switches are suitable for low and high level indication of granules and
powders with a minimum 0.05 kg/dm
Dust Ex versions are available for using the instrument in an explosion-proof environment.
The vibrating rod is a mechanical resonant system, excited and kept in resonance by an electronic unit.
The medium to be measured, when reaching the vibration rod end, will damp the vibration. The change
in vibration intensity is sensed by an electronic unit, which, upon the elapse of the delay time, actuates
the output circuit.
1.2
Accessories
User manual (IP4001)
2 off 3-pole terminal blocks
1½-in, sealing, for BSP only
2 off M20x1.5 cable glands
1.3
Order code
K
(1)
H
1. Only for standard and rod extended versions.
2
Standard model with 1 x SPDT alarm relay
High temperature model with 1 x SPDT relay (not available with Extended Cable option)
B
R 1½-in. BSPT mounting
N
1½-in. NPT mounting
1
Standard length rod, 207 mm insertion length
3
Extended rod, 300-3000 mm insertion length
4
Cable extended, 1000-20000 mm insertion length
3
9
3
density such as cement, lime, sand, grain, feed, sugar, etc.
Aluminum Alloy housing, powder coated
As code 3, but with Remote Electronics
1Z
20-255 Vac / Vdc, no hazardous area approval
5A
20-250 Vac / 20-50 Vdc, ATEX Dust Certification II 1/2 D
/**** State rod or cable extension length in mm
Operating Manual
IP4001, Rev CA

Advertisement

loading