Table of Contents
Advertisement
ICS-I372 User Manual
DIN Rail Mounting (Optional)
The system can be mounted via DIN Rail method with an optional DIN Rail kit.
1. Attach the DIN rail bracket to the rear of the system with three (3) screws.
2. Hang the system onto a rail by engaging the hook of the Bracket into the DIN Rail until it is totally
fixed.
Note: After the unit is mounted, make sure to check that the installation provides strong and
appropriate support and that each part is assembled correctly.
40
#6-32 L6mm
(3.5mmx6mm)
Advertisement
Table of Contents
