Mounting An Sma-Mount Antenna Cable Assembly - Lanner NCA-4020 User Manual

NCA-4020 User Manual

Mounting an SMA-Mount Antenna Cable Assembly

To mount the Wi-Fi/LTE antennas:
1. Take out the antenna pigtail cable from the Antenna Kit. From inside the chassis, insert the SMA Female
Bulkhead through the antenna hole on the panel.
SMA Female
Bulkhead
2. From outside the panel, attach the Washer and Nut, and tighten the Nut using an SMA Torque Wrench.
Warning
Do not use any tool other than an SMA Torque Wrench to fasten the Nut. For example, general pliers or
tweezers without limited twisting force are very likely to cause the distortion of SMA connector.
Washer
41
Nut