Table of Contents
Advertisement
8
User interface
8.13 USB update
In case the remote update feature cannot be used, the camera can also be updated us-
ing a USB memory stick. Place the software update file provided by FLIR Systems in the
root directory of the memory stick (i.e., not in any folder). Do not rename the file. Open
the USB port cover on top of the camera and insert the memory stick in the USB port.
Check that the orientation of the memory stick and the port is correct before inserting the
stick.
The camera will detect the software update present on the memory stick and ask if you
want to apply the update. Press Yes to copy the update to the camera. Do not remove
the memory stick while the update is being copied. Once the update is on the cam-
era, you will be asked to restart the device to apply the update. Remove the memory
stick and put the USB port cover back in place. Shut the camera down by unplugging the
battery cable and start it again by connecting the battery cable. The update will now be
applied.
21
#T810536; r. AF/91009/91009; en-US
Advertisement
Table of Contents
