Shutdown - Teledyne FLIR Si124 Series User Manual

7
Getting started
5. Locking ring
6. Orientation marking 1
7. Orientation marking 2

7.7.4 Shutdown

To turn off the camera, simply disconnect the battery connector from the camera.
Note Do not pull by the cord or use any kind of tool to disconnect the cable.
1. Hold the battery cable connector by the locking ring and pull it outwards. The locking
ring will slide until it releases the connection. Alternatively disconnect the cable from
the battery.
2. The FLIR logo will appear and the system will safely perform a shutdown.
3. The red Power LED will turn off when the shutdown is complete.
If you encounter a problem with the system, a hard shutdown is performed by discon-
necting the battery power and waiting longer until the power led will turn off. If the shut-
down takes more than a 5 minutes after disconnecting the battery, contact FLIR Systems
for service.
#T810536; r. AF/91009/91009; en-US
14