Thermostat - Dru Virtuo 100 Evolve User Manual

4.2.11 Thermostat

By means of the thermostat function, the heating element is switched on
based on the required room temperature.
Switch on the thermostat by pressing the button (fig. 4-10).
1
Use buttons
1
The temperature can be set between 5.0 and 35.0 °C.
2
For a few seconds, the programmed temperature remains visible on the
1
display (fig. 4-11).
The remote control then returns to the main screen.
1
The current room temperature is shown (fig. 4-10).
The symbol is shown on the display.
1
Make sure the remote control is in the same room as the appliance.
3
- The remote control contains a temperature sensor. Therefore, always
2
place it on a fixed, draught-free location with no direct sunlight.
- When the set temperature has been reached, the heating element is
switched off.
The thermostat function can be switched off by pressing the button
1
once more. The symbol is no longer visible on the remote control's
display.
The thermostat has a cycle of a couple of minutes. As a result, it may take
3
longer before the thermostat function responds.
If a time schedule is active and the appliance is switched on manually, the
3
appliance will change its settings according to the time schedule in the
event of a scheduled switch in the time schedule.
User manual
and to select the required temperature.
21