Coupling The Remote Control - Dru Virtuo 100 Evolve User Manual

4.2.2 Coupling the remote control

Before you can use the remote control, it must be coupled with the
appliance. The remote control can only be coupled when it is in the
(fig. 4-2) mode. Observe the following steps to couple the remote control.
The display of the remote control shows the message
1
If not, follow the steps as described in section 4.2.3.
Make sure the appliance if free from voltage by means of the switch
1
(fig. 3-1).
Wait 5 seconds and then flip back the switch.
1
For 5 minutes, it will now be possible to couple the remote control with
2
the appliance.
Press buttons
1
When coupling has been successful, the
1
continuously, the current room temperature is shown and the appliance
can be switched on (fig. 4-4).
User manual
and simultaneously for 3 seconds.
16
(fig. 4-2).
symbol will light up